Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Bedini Monopole Energizer SSG
10-29-2008, 01:53 AM, (This post was last modified: 05-03-2010, 04:41 AM by Easy Skanking.)
#1
Bedini Monopole Energizer SSG
In my course of conspiracy research, Nikola Tesla is a major figure that resurfaces in many arenas. The continuation, validation and practical applications of his ideas and devices is something I find immensely interesting and highly practical if they can be reproduced. I found that Tom Bearden and John Bedini have a solid presentation that is capable of explaining some of the theories and reproducing some experiments that are receiving energy from a source not explained by classical physics.

This source was called the "Ether" by Tesla and also is referred to by others as radiant energy, dark energy, negative energy or energy from the quantum vacuum.

These are my experiments in an attempt to understand and produce this energy for myself. My disclaimer is that learning and experimentation are ongoing. Check back in this post as it is very often updated.

This is the Bedini Monopole Energizer Simplified Schoolgirl Circuit used in the first experiment:

[Image: Schematic1.JPG]

Background on the SSG
The patent is attached to this post and denotes a slightly different set up. A comparison of the two schematics will show the changes to this Simplified Schoolgirl Circuit version.

This is my version using 2 used batteries that I had.
[Image: th_DSCF0019.jpg]

[Image: th_DSCF0031.jpg]

The wheel construction is an inline hockey skate wheel with ABEC-3 bearings and 2 plastic bucket lids connected together to give a mounting for the 7 magnets. All magnets are North pole facing out from the axle of the wheel, hence the monopole designation. It was slightly out of balance and this was corrected by placing small magnets next to the ones on the wheel flowing with the larger fields. I thought that might interfere with operation, but it runs great.
The coil is 843 turns bifilar #23 and #26 magnet wire with 1/8" welding rods cut to fit the spool for the core.

[Image: th_DSCF0021-1.jpg]
The coil connects to the circuit and the batteries at this terminal strip.

[Image: th_DSCF0059-1.jpg]
This is the circuit itself. I have found that connecting the circuit as shown as opposed to breadboarding it is the only way to go. When attempting to use breadboards, the circuit would frequently not work at all and exhibited odd behavior when it did work. As shown the behavior is consistent and tuneable. The potentiometer has been replaced with two resistors, after tuning, for a total resistance of 520 Ohms. You can see the neon bulb already blackening from the discharge of the radiant energy when the charging battery is disconnected.

I'm not sure of the RPMs of the wheel as it is going too fast for me too count but you can see it is really spinning along.
[Image: th_DSCF0033.jpg]


My understanding of the circuit operation is this: When a magnet is above the coil, the coupling of the facing north pole of the magnet and the north pole at the top of the coil creates a momentary monopole interface, thus energizing the circuit by the primary battery and the conventional current starts to rise. As the North pole leaves the coil, the EM field re-guages, or flips polarity, stopping the rise of conventional current and causing the transistor to gate, triggering a reaction from the quantum vacuum of a large spike of energy, or radiant energy inflow. That is the end of the Trigger Phase.
[Image: SSGscope.JPG]

As there is little or no conventional current in the circuit at this phase, the radiant energy is maximized. There is an imaginary or scalar south pole present between the north poles on the wheel that re-guages the coil again as it passes over, which pushes the radiant spike into the charging battery. This is the end of the Charging Phase.
This is repeated as each magnet passes the coil.

The entire system should be in an EM resonance achieved by "pumping" the primary voltage at a particular frequency so that the active vacuum and the curvature of space-time are brought into an interaction with the system itself. This functions on the same principle as a heat pump, except with an environmental input of radiant energy. All elements of the system come into play when searching for this resonance but is still only tuned by impedance adjustment on the trigger side. The resonance is so that the Prigogene tunnel to the Dirac Sea is opened so that negative energy, or negative mass energy, is let through to become positive energy, or positive mass energy aka electrons. This can also be looked at as the B fields of the opposing magnets creating a phase shift of time reversed E field potential so that it comes into phase as conventional current in a collection device like a battery or capacitor. This is shown in the Aharonov-Bohm effect.

A sample charging run data:
STANDING: Primary Voltage: 12.43VDC 9:15PM 10/22/08
Charging Voltage: 10.09VDC

RUNNING: Prim: 12.33VDC falling about 0.01VDC per hour Current: 75mA DC and oscillating 9:15PM 10/22/08
Charging: 11.84VDC Rising at var rates Current: 35mA DC and oscillating

STOP: Prim: 12.35VDC and rising 4:24AM 10/22/08
Charging: 11.89VDC and falling

STANDING: Prim: 12.42VDC 10:04PM 10/23/08
Charging: 11.29VDC

I'll be posting experimental data as soon as it is organized to continue this thread.

***UNDER CONSTRUCTION***
“Today’s scientists have substituted mathematics for experiments, and they wander off through equation after
equation, and eventually build a structure which has no relation to reality. ” -Nikola Tesla

"When the power of love overcomes the love of power the world will know peace." -Jimi Hendrix
Reply
10-29-2008, 05:09 AM,
#2
Bedini Monopole Energizer SSG
Wow, very nicely done. If you can get this to work, do another project by using the same concept and apply it to making the "first" free energy electric car or go-kart. That would be awesome.
[Image: Palestinian_Dawn_by_Palestinian_Pride.jpg]
Reply
10-29-2008, 05:15 AM,
#3
Bedini Monopole Energizer SSG
Impressive
Reply
10-29-2008, 11:57 PM,
#4
Bedini Monopole Energizer SSG
Thanks for the compliments, guys.

This wheel does work, MMG. It runs every time with this load and charges the battery right up. You can see that after charging the charging battery is standing with a net gain of 1.2VDC with a cost of 0.01VDC to the primary battery.
If you look in the last picture, you will see an RC Hummer in the background which is a mobile experiment. Currently, we have 3 running circuits and wheels. The next wheel will be put up soon as well. WIth that one we started doing various load tests with some interesting results.
Stay tuned...;)
“Today’s scientists have substituted mathematics for experiments, and they wander off through equation after
equation, and eventually build a structure which has no relation to reality. ” -Nikola Tesla

"When the power of love overcomes the love of power the world will know peace." -Jimi Hendrix
Reply
10-30-2008, 01:58 AM,
#5
Bedini Monopole Energizer SSG
Real nice, you should make a video:P
[Image: Palestinian_Dawn_by_Palestinian_Pride.jpg]
Reply
10-30-2008, 04:06 AM,
#6
Bedini Monopole Energizer SSG
Let us know when your ready. MMG has a great idea, make a video.
Reply
10-30-2008, 04:26 AM,
#7
Bedini Monopole Energizer SSG
I've only got low resolution cell phone vids, atm. I've been trying to arrange for video for a while now. Maybe sometime soon...
“Today’s scientists have substituted mathematics for experiments, and they wander off through equation after
equation, and eventually build a structure which has no relation to reality. ” -Nikola Tesla

"When the power of love overcomes the love of power the world will know peace." -Jimi Hendrix
Reply
10-30-2008, 11:55 PM, (This post was last modified: 09-30-2009, 12:16 PM by Easy Skanking.)
#8
Bedini Monopole Energizer SSG
Here is the SSG#2 that we have. This one was built by TWOLITE.


[Image: th_DSCF0024.jpg]

This one has 12 magnets and a diameter of about 18" and is made of 1/2" pressboard. This was tested to run on the same primary as SSG#1 and the charging car battery that is seen in the left of the above picture. In the pic above the circuit is using the same 12.4VDC car battery as primary and the load is consisting of a network of 12VDC rechargeable batteries from a cordless drill charger.

One important and very curious behavior of this system is that it self adjusts to the load. When running this system on a car battery, the wheel was going about 700RPM. When using the drill batteries, it was running about 400RPM. Note also the multi-meter showing 3.97VDC and rising.

[Image: th_DSCF0043-1.jpg]

[Image: th_DSCF0025.jpg]

This is the circuit with the potentiometer still in the circuit so that it may be adjusted to tune the current on the trigger side to minimize conventional current.

[Image: th_DSCF0060.jpg]

Here, the load was a 12VDC computer fan and a 12VDC motor in parallel. The wheel was running about 170RPM and the load was running between 3.2V and 3.9V DC. As the wheel spun up to speed, the fan will oscillate without actually spinning while the motor goes slowly and picks up speed. Once the fan reaches a voltage of about 3.0VDC it will start to spin. Once the fan starts spinning it takes a short amount of time for the wheel to settle at a speed. As with every load this type of circuit sees, the wheel will have a top RPM that it will run at for an undetermined amount of time and then spin down to a slightly lower RPM. It will remain at this lower RPM for another undetermined time and then spin back up to the higher RPM.

[Image: th_DSCF0070-1.jpg]

Here another lighted 12V DC fan was added to the load in parallel. After observing the fan for a while, the light flashes in a particular pattern. It seems to flash in time with the pulsing of the transistor. The lights do go completely out at one point in the rotation of the wheel. We are not sure of the cause or the relevance of this just yet.


****UPDATING ******
“Today’s scientists have substituted mathematics for experiments, and they wander off through equation after
equation, and eventually build a structure which has no relation to reality. ” -Nikola Tesla

"When the power of love overcomes the love of power the world will know peace." -Jimi Hendrix
Reply
10-31-2008, 01:25 AM, (This post was last modified: 01-20-2009, 12:11 AM by Easy Skanking.)
#9
Bedini Monopole Energizer SSG
Here we were trying to run both circuits and wheels off of the same primary battery since the drain on a single system was so low. The only place the circuits had any contact was their connection to the primary. Everything else including coils and loads were seperate.

[Image: th_DSCF0050.jpg]

[Image: th_DSCF0051.jpg]

The first circuit was the SSG#1 with the same load as before and the second circuit was the SSG#2 with a load of 2 12VDC car batteries.

Dual System

STANDING: Primary: 12.30VDC 11:23PM 10/23/08
Charging 1: 11.30VDC
Charging 2a: 2.45VDC
Charging 2b: 6.03VDC

RUNNING: Prim: 12.29VDC Current to #1: 68mA DC Current to #2: 68mA DC
Charging 1: 11.79VDC Current: 35mA DC
Charging 2a: 11.81VDC Current: 33mA DC
Charging 2b: 11.80VDC Current: 33mA DC

STOP: Prim: 12.29VDC 4:47AM 10/23/08
Charging 1: 11.79VDC and falling
Charging 2a: 11.81VDC and falling
Charging 2b: 11.80VDC and falling

STANDING: Prim: 12.29VDC 3:30PM 10/25/08
Charging 1: 11.63VDC
Charging 2a: 11.23VDC
Charging 2b: 11.06VDC

One interesting thing we have noticed about these systems is that they run very cool. Absolutely every component is usually a few degrees cooler than room temperature. With both systems running there was a very cold area in between both coils. If we left our hands there for very long, they got really cold...almost to the point of losing the feeling in the tips of our fingers.
“Today’s scientists have substituted mathematics for experiments, and they wander off through equation after
equation, and eventually build a structure which has no relation to reality. ” -Nikola Tesla

"When the power of love overcomes the love of power the world will know peace." -Jimi Hendrix
Reply
10-31-2008, 02:34 PM,
#10
Bedini Monopole Energizer SSG
Gawd, this is so interesting! I'm super proud of what you've been doing easy! what an accomplishment! i like the setup too..... you are definitely a mad scientist! :freaked:exciting stuff..... awesome that you shared it with us! B)
Reply
10-31-2008, 05:44 PM,
#11
Bedini Monopole Energizer SSG
This is pretty neat...not sure of the implications of it though. Will this provide energy/power/electricity?
Great job though taking the initiative to work through it. Much Respect.
"Listen to everyone, read everything, believe nothing unless you can prove it in your own research"
~William Cooper

DTTNWO!
Reply
11-01-2008, 12:37 AM, (This post was last modified: 11-28-2008, 06:59 AM by Easy Skanking.)
#12
Bedini Monopole Energizer SSG
Thanks inheritor and SiLVa! :D
I don't know if I'm mad....maybe more like really pissed off.:LOL:

SiLVa, the implications are huge.
As it stands under classical physics and electromagnetic theory, if you have a 12VDC source and a 6VDC charging, the only result you can get is a 9VDC source and a 9V charging. It says you have 18VDC and can get no more. This is an underunity system or COP < 1. When you use a battery charger or generator to produce electricity to charge a battery, you use conventional current to PUSH the voltage into the battery. Now because there are electrons all down the path to the charging battery and they have nowhere to go, there is a push back or current that resists the charge you are trying to give. So as a result, there is more energy required to charge a battery because of the resistance as well as heat generated as a byproduct of those electrons being excited by that current trying to push in 2 ways. This is also known as destroying the dipole, or source charge, because the + and the - are left connected. The current will rise and eventually destroy the connection unless clamping is done to limit the current as is done with all electronics currently. Current is natures way of keeping the dipole apart so that the universe doesn't short itself out.

This system generates NO heat at all and it actually seems to absorb heat or generate cold, depending on how you want to look at the thermodynamics. That by itself tells me that it is not using conventional current, or Hertzian waves, to charge the charging battery. The fact that the small bulb on the trigger side also only flashes, indicates that the conventional current is pulsing instead of a constant flow like a regular battery charger. This is also supported by the very small current measurements as well as the very small drain on the primary battery. Conventional chargers have neither of those characteristics.

In the SSG circuits, we are using our primary to create the electromagnetic field on the coil, and the collapsing EM field and opposing magnetic fields to do all the work and to keep the dipole from being shorted out. We are also appearing to have a greater output than our input, or voltage drop on our charging battery, thus indicating that this is an overunity system or COP > 1.

This indicates that there is something going on that classical physics can't explain. Technically, that is not true as Maxwell had this information in his original equations but were dropped lest he be crucified by his peers. It is still ignored in the mainstream to this day.

The explanation of what he dropped from his equations is this: Classic physics says the electron carries a charge of 1.602 176 487(40) × 10–19 coulombs. It never explains where this charge comes from or with relation to what. When you measure voltage, it has to be between 2 points not one single point as is represented in an electron. Tom Bearden has put forth that the electron charge is actually the difference between the potential energy in the electron itself and the surrounding space (vacuum). This would be the correct way to measure voltage. Both potentials are infinite and the difference is 1.602 176 487(40) × 10–19 coulombs, or the charge of the electron. The electron carries a negative charge which shows which way the electrons are flowing. So we have an INFINITY of energy available but the only way we use it is to keep the + and - connected, destroying the dipole, or in other words, closed loop systems. So we are working against ourselves in all of our power systems.

So what is the deal with the SSG?
Quote:Except for extraordinarily powerful EM fields, the normal EM fields do not produce sufficient gravity or antigravity (curvatures of spacetime) to be practical at all. To be practical, enormously more energy density in spacetime is required than in normal EM fields alone. However, that can be achieved when one realizes that the present EM field theory has been grossly distorted. Specifically, a field from a source charge is actually a flow of EM energy from that charge, and since fields are actually misdefined as what gets diverged from them by a unit point static charge, what is usually called the "field" of the source charge is only the Poynting diverged component that flows from the source charge. I.e., it is the component of the energy flow that is in a linear form and can be diverged by intercepting/diverging charges. In addition to that linear Poynting component of flow, there is an enormously larger circuital (non-diverging) Heaviside component of the flow that usually does not interact with anything, and thus was arbitrarily discarded by Lorentz on the grounds that "it has no physical significance" because it doesn't do anything.
Source

Quote:• Two scientists—Heaviside { } and Poynting { }—simultaneously and independently proposed EM energy flow through space in the 1880s, after Maxwell was already dead. Before that, the concept did not exist in physics.
• Poynting never considered anything except the relatively small, diverged component of the energy flow that enters the conductors and powers the circuit. We measure the energy actually in the circuit and powering it, so we measure the Poynting component.
• In addition to the diverged energy flow component, Heaviside also discovered an accompanying nondiverged curled energy flow that is enormously larger than the diverged flow component. Because of its zero divergence in a flat or reasonably flat spacetime, the Heaviside component does not usually interact with normal instruments or anything else, so we do not measure it. Extracting energy from this available, enormous, but wasted energy flow from every generator and power source would solve the world’s energy crisis for centuries. The Heaviside nondiverged flow component is often a trillion times as large as the Poynting flow component.
• Given a significant curvature of local spacetime, the divergence of the curl need not be zero. In that case, a part of the Heaviside energy flow curled component is transduced into an extra Poynting energy flow component diverged into the circuit. Our instruments will measure the anomalous extra Poynting energy flow component.

-From "PERMISSIBLE NESS COP > 1.0 ELECTRICAL POWER SYSTEMS TAKING ENERGY FROM THE VACUUM"
© T. E. Bearden, Sept. 19, 2003

So by means of an EM field growing and collapsing, we are triggering and catching that non-divergent Heaviside component of our primary battery's divergent Poynting component. So this is where the energy is coming from. The exact process of this phase change from quantum potential (non-divergent) to physical actual charge (divergent) is explained by the Aharonov-Bohm effect.
Quote:The Aharonov-Bohm effect, sometimes called the Ehrenberg-Siday-Aharonov-Bohm effect, is a quantum mechanical phenomenon by which a charged particle is affected by electromagnetic fields in regions from which the particle is excluded. Werner Ehrenberg and R.E. Siday first predicted the effect in 1949[1], and similar effects were later rediscovered by Aharonov and Bohm in 1959[2]. (After publication of the 1959 paper, Bohm was informed of Ehrenberg and Siday's work, which was acknowledged and credited[3] in Bohm and Aharanov's subsequent 1961 paper[4].) Such effects are predicted to arise from both magnetic fields and electric fields, but the magnetic version has been easier to observe. In general, the profound consequence of Aharonov-Bohm effects is that knowledge of the classical electromagnetic field acting locally on a particle is not sufficient to predict its quantum-mechanical behavior.

The most commonly described case, sometimes called the Aharonov-Bohm solenoid effect, is when the wave function of a charged particle passing around a long solenoid experiences a phase shift as a result of the enclosed magnetic field, despite the magnetic field being zero in the region through which the particle passes. This phase shift has been observed experimentally by its effect on interference fringes. (There are also magnetic Aharonov-Bohm effects on bound energies and scattering cross sections, but these cases have not been experimentally tested.) An electric Aharonov-Bohm phenomenon was also predicted, in which a charged particle is affected by regions with different electrical potentials but zero electric field, and this has also seen experimental confirmation. A separate "molecular" Aharonov-Bohm effect was proposed for nuclear motion in multiply-connected regions, but this has been argued to be essentially different, depending only on local quantities along the nuclear path (Sjöqvist, 2002[5]).

A general review can be found in Peshkin and Tonomura (1989)[6].

So, we have an easily captured source of electricity for a very small cost of trigger energy but the stance of the science world is that it doesn't exist because we can't measure it. TPTB keep this myth in place because they make money and retain power by having a monopoly on the sources of energy that most of the world uses. All of this was essentially found by Tesla, among others.

The trick now, is to find out how to scale the output to a desired level as opposed to the bare minimum to run the load as the SSG normally operates. We have just started to do some experiments dealing with this.

If I disappear, you guys know why now. :quiet::shocked::laughkick: :paranoid:
“Today’s scientists have substituted mathematics for experiments, and they wander off through equation after
equation, and eventually build a structure which has no relation to reality. ” -Nikola Tesla

"When the power of love overcomes the love of power the world will know peace." -Jimi Hendrix
Reply
11-01-2008, 02:43 AM,
#13
Bedini Monopole Energizer SSG
Great job. This is not what we studied in Electronics years ago, and I'm sure there was a reason. Control.
Reply
11-01-2008, 03:16 AM, (This post was last modified: 11-01-2008, 03:42 AM by Easy Skanking.)
#14
Bedini Monopole Energizer SSG
Very true, hilly. I never studied anything like this when I studied electronics, either. It has taken a very open mind and lots of reading and experimenting to see that they were only teaching us part of the picture. The part that was omitted only happens to be capable of solving the worlds energy needs...but that happens to be in direct opposition to TPTB. That's why Tesla lost his funding with J.P. Morgan and any of this tech has been suppressed whenever it re-surfaces in the public.
“Today’s scientists have substituted mathematics for experiments, and they wander off through equation after
equation, and eventually build a structure which has no relation to reality. ” -Nikola Tesla

"When the power of love overcomes the love of power the world will know peace." -Jimi Hendrix
Reply
11-01-2008, 05:05 AM,
#15
Bedini Monopole Energizer SSG
my you've been hard at work, hope you get some where with it:)
&Alice laughed, &There's no use trying,& she said: &one can't believe impossible things.& &I daresay you haven't had much practice,& said the Queen. &When I was your age I always did it for half-an-hour a day. Why, I've believed as many as six impossible things before breakfast.&
- Lewis Carroll

&Things are seldom as they seem ... Skim milk masquerades as cream.&
- Gilbert and Sullivan (Pinafore)

At NASA, it really is rocket science, and the decision makers really are rocket scientists.
But a body of research that is getting more and more attention points to the ways that smart people working collectively can be dumber than the sum of their parts. .. Irwin Janis? &Groupthink:& is a mode of thinking that people engage in when they are deeply involved in a cohesive in-group, when the members' striving for unanimity override realistic appraisals ? It is the triumph of concurrence over good sense, and authority over expertise.&
-John Schwartz & Matthew L. Wade
Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  OFFICIAL BEDINI SG MACHINE TRAILER - Energy from the Vacuum - DVD Part 33 investolator 7 2,624 01-28-2014, 09:02 AM
Last Post: investolator

Forum Jump:


Users browsing this thread: 1 Guest(s)